Stop first if
- There is ice, a wet surface, frost, high wind or lightning.Stay off the roof. Log the conditions and that nobody went up.
- The deck deflects underfoot, or framing moves or cracks.Keep people off and out, and call an engineer.
- Overhead wires are near the work or down.Keep clear and call the utility.
01
Ask on the call
6Homeowner? These are the questions a good technician will ask you. Having the answers ready makes the first visit count.
- When was the storm, and what did you see?
- Is water coming in now?
- Which slopes lost shingles?
- How old is the roof, and do you have install records?
- Was a door or window blown open or broken?
- Is the roof still under a maker's warranty?
02
Bring
6- Binoculars
- Flashlight
- Moisture meter
- Tape measure
- Phone for photos
- Extension ladder and fall protection
03
Check on site
6- From the attic, look for nail points, shiners, wet insulation and missing soffit.
- Check nail position, count and drive depth on intact shingles, both beside the losses and on other slopes.
- Test tab bond on several slopes, and check starter, rake tabs and ridge cap laps.
- Compare weather and install records with the shingle wind class. Misplacement across the roof points away from storm damage.
- On low slope, start with edge metal, tented plates and rooftop equipment.
- Record hail marks with photos, and leave conclusions to a qualified person.
04
Keep on the record
4- Nail position, count and depth samples
- Tab bond results by slope
- Storm date and wind records
- Photos before any reseal on a warranted roof
General guidance for a qualified person, not a finding about any home. The person on site decides.